Instanta I2CB10 Instatap G2 Commercial Boiling Hot Tap 10L - Polished Stainless

Instanta I2CB10 Instatap G2 Commercial Boiling Hot Tap 10L - Polished Stainless

Installation Easy to install with font positioned in work surface with boiler sited below. Adequate space around unit to provide sufficient airflow and ventilation.

Electrical Fitted with 1.7 metres of cable and a 13 amp moulded plug.

Plumbing Designed for direct connection to a potable cold water supply using the 1.5 metre (3/4” BSP) food quality hose supplied. An isolating valve should be installed between the supply and the machine. Right-hand side water connection.

• 3 dispense options: free pour, small measured pour and large measured pour
• SteriTouch® antimicrobial additive on the touchpad which kills 99.99% of bacteria
• Smooth flow water dispense to minimise spluttering and steam
• Electronically controlled for constant temperature up to 96°C
• Early warning diagnostics with LCD read-out
• Automatic re-circulating mode to prevent under temperature drinks
• Height (mm) - 520
• Width (mm) - 230
• Depth (mm) - 415
• Font width (mm) - 150
• Font depth (mm) - 197
• Font height (mm) - 275
• Font clearance (mm) - 280
• Tap font - Standard
• Power loading (kW) - 3
• Heat-up time (mins) - 20
• Recovery Rate (litres) - 0.5
• Rapid Draw-Off (litres) - 10
• Rapid Draw-Off (cups) - 60
• Hourly Output (litres) - 30
• Hourly Output (cups) - 180
• Stand by Loss (kW/h) - 0.85
• Keypad - Antimicrobial SteriTouch