JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

Water Softener For Dishwashers & Glasswashers 8 litre - WS8-SK

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Softener - Manual - 8 litre

Cylinder type, 8 Litre capacity, Stainless steel construction, flexible hose fitted, No electric supply required. Typical softening capacity:1500 litres.

Install the water softener in rooms where the temperature is minimum 5°c and maximum 30°c

More Information
Brand	Classeq
Price	£146.00
Delivery	7-14 Working Days
Weight	10.000000
Capacity	8 Litre
Dimensions	415(H) x 180 (dia)
Colour	Stainless Steel
Power Supply	Electric - 13 Amp Plug In
Extra Specification	CONNECTION TO THE WATER MAINS (Refer to Fig 1) • The user must install a tap between the water mains and the water softener so that the water can be turned off in an emergency, plus a check valve to avoid any pressure returns. • Connect the water inlet and outlet hoses to the water softener and make sure these are tightened properly. • Place the drain hose directly in a drain. COMMISSIONING Rinsing of resins (Refer to Fig 2) Place the outlet hose in a drain. Turn the taps levers to the left and open the water inlet; let the water flow until clear, then stop the inlet water and connect the outlet hose to the machine to be supplied. Routine Regeneration (Refer to Fig 3) • Place the depression hose in a bucket. Turn the taps levers to the right and wait for the pressure to drop. Remove the cover by unscrewing the knob and then add the salt in the amount indicated to suit the model (see table 1). • WARNING: Remove any salt from the seal on the cover. Regeneration Mode (Refer to Fig 4) • Replace the cover and tighten the knob securely, then move the inlet tap lever to the left. • WARNING: Remove any salt from the top of the water softener. • Let the salty water flow from the drain hose until the water is soft (about 40 minutes). Normal Operating Mode • Return the water softener to normal working conditions by turning the outlet tap lever to the left. • Regeneration completed. • WARNING: the equipment connected to the water softener is not supplied during regeneration. To ensure the efficiency of the water softener at all times, we recommend routine regeneration to suit the use made of the water softener and the hardness of the water used.